How to measure your car for a Top Half Car Cover referring to the image above:
Step 1. Take a tape measure and place it at the base of the front windshield closest you can get to the middle.
Step 2. Run the tape measure over the roof of the car to the base of the rear windshield closest you can get to the middle.
THIS WILL GIVE YOU THE (A) MEASUREMENT
Step 3. Take the tape measure for the base of the drivers side window.
Step 4. Run the tape measure over the roof of the car and down to the base of the passenger side window.
THIS WILL GIVE YOU THE (B) MEASUREMENT
Easy Installation Instructions:
Step 1: Open the trunk. Place the Cover on the trunk lid with storage bag opening facing the user.
Step 2: Apply the hooks to secure Cover to the left and right side of the trunk.
Step 3: Close the trunk so the hooks are secure and then tighten the adjustable rear strap as needed.
Step 4: Then pull the Cover from the storage bag and proceed to walk it around to the front of the car.
Step 5: Secure the front strap to the hood or grill whichever is more secure. Make sure to maintain proper tension by tightening the adjustable front strap.
Step 6: Walk to the left then right hand side of the car and bring the elasticized hem down around the mirrors. It may sometimes be necessary to fold in mirrors to ensure proper fit. We also recommend cutting small slits to allow the rear view mirrors to slide through. This could help secure a tighter fit during high winds.
Step 7: On the back end of the cover which covers the rear window, you will find a bungee cord on the left and right hand side. If needed you can stretch the bungee cord and wrap it around the buttons on the rear trunk strap to help cover the rear window.